Category
Subcategory
Vacuum Pump ( Wind Jammer )Small in/out take hole
Vacuum Pump ( Wind Jammer ) Small in/out take hole Off a Working Machine P9510-A Suitable Vutek QS and GS machines Info on plate - 117638-03 - 240 Volts - 50/60 Hz - Type E - 3.5A
Vacuum Pump ( Wind Jammer ) big in/out take hole
Vacumn Pump ( Wind Jammer ) Compatible with :- - Vutek - EFI Pro 30H - EFI Pro 32r / Pro - 32r+32H - GS2000 - GS2000 Pro - GS2000 Pro-Cp - GS2000 Pro-TF - GS2000LX - GS2000LX Pro - GS3200 - GS320...
EFI VUTEk QS series parts
OPEN TO OFFERS - BULK OR INDIVIDUAL SALES - Original EFI parts - Can offer new part, or used parts at discounted rate Bearing Pulley Used 1 Carriage Foot Assembly AA90996-FS Used 3 Kit, rea...
EFI VUTEk, Assy, Power Board, HS125
EFI Part Number: 45129568 Off a working machine
ASM Digital Board for the HS125 With Cover and Hard drive
ASM Digital Board HS125 with Cover and Hard drive Off a working machine
ASM Analog Board and car lift Board for HS125 with cover and HDWR
ASM Analog and car lift board for the Hs125 with cover and HDWR Came off a working machine
EFI VUTEk PCBA JPDB HS125 BONITO
The JPDB (Jet Pack Driver Board) PCBA is a crucial component within the ink delivery and jetting system of the EFI VUTEk HS125 Pro (also referred to in development or marketing contexts as the "Bon...
2017 EFI VUTEk Pro 16H
Condition Excellent Ink Type UV Print Width/Area 1.6m Colour Combination CMYK & White (not currently in use) RIP Yes Power Requirements 3 Phase Availability Immediate. Viewing welcome and can...
EFI VUTEk QS2000 PCBA, Plug-IN, Supermux, Uhura, VUTEk - 45056974
This PCBA, Plug-IN, Supermux, Uhura, VUTEk is suitable for VUTEk QS2000 printers. This is the original VUTEk part (number 45056974).
🔧 Vutek QS series – Parts for Sale 🔧
Vutek QS series – multiple parts available. Genuine OEM parts . Removed from a machine which was operational prior to dismantling. Parts can be sold individually or as a bundle. Photos and part n...
EFI VUTEk HS125 or HS100 Media Belt / Transport Belt
2x brand new media belt / transport belt for the EFI VUTEK HS125 / HS100 models Measurements 3.25 x 4.42m Comes with pintle Can assist in fitting to machine for additional fee if required
2012 EFI VUTEk QS3 Pro
- Very good working condition - Refurbished belt and very good quality - 3.2 metre hybrid - roll to roll and flatbed media - 6 colour + White configuration - Machine can be demonstrated
2017 EFI VUTEk FabriVu 340
2017 EFI FabriVu 340 Maximum Print Size 3200mm 4 colour EFI ColorMax inks Regularly used and currently under contract Annually serviced Total square metres printed 52,375 Seller purchased fr...
PCB C W connection board - AA90655
Suitable for EFI VUTEk GS & QS pro series printers. This is the original EFI part (number AA90655).
EFI VUTEk 45139845 ASSY, POWER BOARD, GS SERIES
Suits EFI VUTEk GS series and LX3
2021 EFI VUTEk Q5r
Machine info from seller - 5.2m roll-fed UV-LED printer - CMYK configuration (all channels active and working well) - Fully operational and can be demonstrated - Rip not included in sale - Been un...
EFI VUTEk Bleeper -SC628ANR
This is a electro mechanical audible alarm design for safety signalling.
Portserver TS16
- Portserver TS-16 - EFI SERIAL SERVER, 16 PORT - EFI number - 45153253 This is the Connectport Server - when installing sw 4.2 forward, it will ask for which model of serial server is installed
EFI VUTEk Control / Print Motherboard
2x Control / Print Motherboards for EFI VUTEk GS3200 45069501 - TYAN S5387-EFI Board
2012 EFI VUTEk GS3250r
- 6 colour - Rip included - 3.2m roll printer - One owner from new - Was around £300k as a brand new purchase in 2012 - Seller confirms a good operational condition - Jet test photos taken August 2...
2014 EFI VUTEk GS3250LX Ultradrop
- CMYKcmykWW colour configuration - Maximum print size 3.2m - In very good condition - Fully maintained - Available now - No rip in sale - Was over £300k new - One owner from new - No known issues ...
2016 EFI VUTEk LX3 Pro
2016 EFI VUTEk LX3 PRO 3.2m Hybrid printer LED technology Resolution of up to 1000dpi 8 colour + White Print to a wide range of roll to roll and rigid medias up to 2" LED cold cure technology...
2015 EFI VUTEk GS3250LX Ultradrop
- CMYKcmykWW configuration - Maximum print size: 3.2m - Machine is in very good condition - Fully maintained - Tables included - Available now - ready to demo - No rip in sale - Was over £300k new ...
EFI VUTEk UV Lamp Shutter Assembly - Parts
EFI VUTEk QS / QS Pro - Dichroic coated UV lamp shutter system kit. Typically includes: Shutter Arms and solenoid Shaft Reflectors Microswitches Bearings, clamps, washers Solenoid shutter a...
2012 EFI VUTEk QS2 Pro
- CMYKlclmW configuration - Very good used condition with great jet test - Been very well maintained with a clean belt - Can be demo'd - Comes with tables (front and rear) - Transformer included (i...
2021 EFI VUTEk H5
2021 8c+w +-250.000m² Client working using Fast4 Price includes decommission and machine loaded on to buyer truck On service contract since install in 2021 Can be demonstrated by appointment ...
2014 EFI VUTEk GS3250LX Pro
EXCELLENT CHANCE TO PURCHASE A LARGE FORMAT PRINTER WITH ONE OF THE SMALLEST FOOTPRINTS - 4 colour configuration - 3.2m hybrid printer with LED curing technology - Very good jet test at 22nd Oct 2...
PCB Motherboard GS and H2000
- S5512GM2NR board reference. - This motherboard is suitable for EFI VUTEk GS and H2000 series printers. - This is the original EFI VUTEk part (number 45126266).
2018 EFI VUTEk HS125 Pro Feeder Table - Gen II 3/4 Loader/Full Automation Transition Table
Spare feeder table for a VUTEK HS125 Pro. HS125 printer is currently in use, but table remains unused due to space restrictions, so is for sale. Hole in belt. Belt can be replaced at additional c...
QS FILTER 4 INCH UV LAMP
- EFI part number A60179-A The part is compatible with models as below: - PV200/600 - PV320/400 - QS2 Pro - QS3 Pro - QS220 - QS2000 - QS3200 - QS3200r - QS3220 - QS3250r
EFI VUTEk Bulk ink filter capsule 45087559
- 6 micron black Small Capsule Filter - Suitable for EFI VUTEk & Agfa Jeti printers - Specifications - Type: Small Capsule Filter - Removal rating: 6 micron - Connector type: Luer lock - Maximum Op...
EFI VUTEk DEGASSER, 2X6, RADIAL FLOW, QD, QFTREZ - 45148477
This Membrane Contactor is suitable for Vutek GS3250 LX, GS2000 Pro-TF and GS 5500 LXR printers. Original EFI Vutek part number - 45148477.
FILTER FOR 2.36 IN FAN including plastic fan guard -P4970-A
Compatible machine: Suitable for Vutek GS Printers
EFI VUTEk 6 micron last chance ink filter 45080375
- EFI VUTEk part number 45080375 - 6 micron white Last Chance Filter (LCF) is suitable for solvent & UV inkjet printers. - PALL part that corresponds to original Mutoh Rockhopper bulk ink system fi...
EFI VUTEk Ink Pump 45104690
- ASM,PUMP,KNF,INK,W/32CM WIRE,TERMINALS - Suitable for EFI VUTEk 16H, H1625 - Part number 45104690
EFI VUTEk Compliance Chamber Damper for GS series - 45093264
Damper is suitable for EFI VUTEk GS Series printers. This is a high quality generic damper that corresponds to EFI part number 45093264. VUTEk GS2000 VUTEk GS2000 Pro VUTEk GS2000LX VUTEk GS200...
PCB Interface-A - AA70175
Suitable for EFI VUTEk QS Series printers. This is the original EFI VUTEk part number AA70175 Compatible printer brands: VUTEk
PCBA Fan Controller Board - 45093588
Suitable for VUTEk GS3200 printers. This is the original VUTEk part number 45093588 Compatible machine: Vutek
PCB Capper waste Translation Board - 45104816
Suitable for Efi Vutek GS series printers. This is Vutek original part number 45104816 .
PCBA Ink Transition Board - 45094830
Suitable for VUTEk GS printers. This is VUTEk original part (number 45094830).
PCB Interface -A - AA70175
Suitable for EFI VUTEk QS Series printers. This is the original EFI VUTEk part (number AA70175).
PCB C W Translation Board - AA90654
This is the original VUTEk part (number AA90654)
PCB Carriage Interface Digital 7C Board - AA94040
Suitable for VUTEk QS2000 printers This is the original VUTEk part (number AA94040)
EFI VUTEk GS Series shim carriage height SACO - 45069429
- Suitable for EFI VUTEk GS series printers - OEM part number 45069429
TRANSFORMER AC 7.0-7.5KV STATIC ELIMINAT
- OEM part number P3978-A - This Dual Voltage Transformer AC 7.5Kv 230V is a static neutralising power supply - Used by the Static Bars on QS/GS series printers
Static Eliminator 6 in long - QS/GS
- 164cm long - Shockless rectangular static bar - Comes with shielded cable - OEM part number is P4559-A It is used in VUTEk QS and GS series printers
Damper (LX3)
DAMPER, VERTICAL, DRY-BR - This damper is suitable for EFI VUTEk LX3 printers - Corresponds to EFI part number 45140476
EFI VUTEk PCB Motherboard S5387
- TYAN S5387 EFI Board Fiery EX8002 (45069501) - Compatible with EFI VUTEk GS models
EFI VUTEk COUPLING, INK WGHT SENS SMRZ SEAL SAC
- Original EFI part - Part No; 45077361 - Plastic - Can offer new part, or used parts at discounted rate Suits all models as below - GS2000 - GS2000 Pro - GS2000LX - GS2000LX Pro - GS3200 - GS325...